WattMaster's WHP Systems Software Download Page

Software

New Update - Prism II
Computer Front End Software Program
For Microsoft® Windows® NT 4.0/ Window® 2000/ Windows® XP (Recommended) or Windows® Vista
Version 3.3.1
To Download Click On The Prism II Logo

Note: If you have currently have Prism installed on your computer and you want to upgrade from Prism,Prism II version 1.x.x, Prism II version 2.xx without having to re-enter all the data you have programmed for unit descriptions and job sites, you must run the update software contained in the download file before installing the Prism II software. Download and read this file if you are unsure how to install or update the Prism II version 3.x.x program Prism II Upgrade & Installation Instructions

Download this file if you want to set up a DEMO of typical Orion Controllers
To Download Prism II Demo Mode Files - Click Here

WattMaster customers now have new complete Windows Based Graphical Interface intended to ease the user interaction with their building HVAC system. It provides enhanced, easy to understand status screens for each type of WattMaster system installed. Prism II software has provisions for custom screens which allow floor plans, equipment photos or user defined summary screens to be implemented by the user to meet their own individual needs. All controlling setpoints, trend logs and alarm conditions are accessed in the Prism II environment. Prism II can be configured for a direct On-Site installation, a Remote Modem connection, or a TCP/IP Internet connection to several installations.

To use Prism II you or your end user must have a computer that meets or exceeds the following specifications:

Software Requirements
Operating System	• Microsoft® Windows® 2000, Windows® XP, Windows® Vista or, Windows® 7,
Minimum Hardware	• Windows® compatible computer • Pentium 2 GHz Processor (Recommended: Pentium 4 2 GHz or greater) • 1GB RAM (Recommended) • 120 MB hard drive space • XVGA (1024 x 768) adapter and monitor (Recommended: 1280 x 1024) • Network card for TCP/IP connection when IP Module is used
In addition, you must have a CommLink (CommLink II, CommLink III, or CommLink IV) installed on your system in order to connect and communicate between your computer and the system. If remote communications to the installation are required, a Remote Link (Remote Link or Remote Link II) on-site modem (phone line) or the IP-Link or IP-Module (Ethernet) must also be installed.

Prism Computer Front End
Software Program
For Windows 95/98/ME/XP/2000 Prism Version 3.3.29
Is Available Below

14.5 Megabyte Download
Includes Online Prism Technical Guide To Download The Latest Version Of Prism
Click On the Prism Icon Above WattMaster WHP Prism Installation Instructions Download and read this file if you are unsure how to install the program

WattMaster WHP System users now have a complete Windows Based Graphical Interface intended to ease the user interaction with their building HVAC system. It provides standard, easy to understand status screens for each type of WattMaster WHP System controller installed. Prism software has provisions for custom screens which allow floor plans, equipment photos or user defined summary screens to be implemented by the user to meet their own individual needs.

All controlling setpoints, trend logs and alarm conditions are accessed in the Prism environment. Prism can be configured for a direct On-Site installation, a Remote Modem connection, or a TCP/IP Internet connection to several installations.

To use Prism you or your end user must have a computer that meets or exceeds the following specifications:

IBM™ compatible computer
Pentium 200 MHz or Faster Microprocessor
64 Megabytes RAM
Windows 95 / 98 / ME / XP/2000
Super VGA Monitor with 1024 x 768 Resolution Minimum
Available Serial Port for On-Site Installations
Internal or External Modem for Remote Installations
Network Card for TCP/IP Communications

In addition, you must order and install the optional CommLink II Communications Interface in order to connect and communicate between your computer and the system. If remote communications to the installation are required, the Remote Link on-site modem must also be installed.

USB Driver Software
USB Drivers for SS0073 USB-Link
& PT-Link II
(Instructions)

To Download the Software File
Click on the Picture Below

USB Driver Software
USB Drivers for Windows Vista & 7
(Instructions)

To Download the Software File
Click on the Picture Below

IP-Link Software, Drivers and Manual

For Windows 98/ME/XP/2000

To Download the Software File
Click on the Picture Below

USB Driver Software
USB Drivers for Windows XP
(Instructions)

To Download the Software File
Click on the Picture Below

Home

Products Company Contact Us Software Literature Distributors Training Parts