Prism 2
Computer Front End Software Program
Version 3.3.7
To Download the Software File
Right Click on the Picture Below and Select
"Save Link As" or
"Save Target As". Select "Desktop"
as Your File Destination to Download the File to Your Computer

Once Downloaded, Double Click on the File to Extract its Content

Prism2

 Prism 2 Installation Instructions
Download and read this file if you are unsure how to install the program


System Requirements
Note: Prism 2 is not intended for a server/client environment.

Operating System • Microsoft® Windows® 2000, Windows® XP, Windows® Vista or, Windows® 7, 8
Minimum Hardware

• Windows® compatible computer
• Pentium 2 GHz Processor (Recommended: Pentium 4 2 GHz or greater)
• 1GB RAM (Recommended) or greater(
• 120 MB hard drive space
• XVGA (1024 x 768) adapter and monitor (Recommended: 1280 x 1024)
• Network card for TCP/IP connection when IP Module is used

In addition, you must have a CommLink (CommLink II, CommLink III, CommLink IV or CommLink 5) installed on your system in order to connect and communicate between your computer and the system. If remote communications to the installation are required, an IP-Module (Ethernet) must also be installed.
Download this file if you want to set up a DEMO of typical
WattMaster VAV Controllers

To Download Prism 2 Demo Mode Files - Click Here

USB Driver Software
USB Drivers for For All Products:

To Download the Software File
Right Click on the Picture Below and Select
"Save Link As"
or "Save Target As". Select "Desktop"
as Your File Destination to Download the File to Your Computer

Once Downloaded, Double Click on the File to Extract its Content

Prism

Prism Software Version 3.3.29

To Download the Software File Right Click on the Picture Above and Select "Save Link As" or "Save Target As". Select "Desktop" as Your File Destination to Download the File to Your Computer. Once Downloaded, Double Click on the File to Extract its Content

Home Products Company Contact Us Software Literature Distributors Training Parts


WattMaster Products are Proudly Made in America
For comments please contact the webmaster at [email protected]
© 2011 WattMaster Controls, Inc. All Rights Reserved.